A320 EFIS CUBE:
1. Enter the FW upgrade page of the bridge software.
2. Disconnect the USB cable from the device.
3. Press and hold the MASTER WARN button on the device.
4. Reconnect the USB cable.
5. Release the MASTER WARN button.
6. In flash mode, the backlight will enter breathing mode.
7. Click START to begin the upgrade.
8. The device will restart after the upgrade is complete. 9.Done.
A320 FCU CUBE:
1. Disconnect the USB cable.
2. Press and hold the LOC buttons.
3. Release the buttons after connecting the USB cable.
4. Go to the FW upgrade page and click « Start ».
A320 RMP COMBO CUBE:
1. Launch the Bridge Software and navigate to the FW Upgrade section.
2. Disconnect the USB cable from the device.
3.While holding down the ATC MSG button on the device, reconnect the USB cable.
4.Release the ATC MSG button, then click the « Start » button in the bridge software.
5. Wait until the upgrade process completes. The device will automatically restart once the firmware has been successfully installed.
A320 MCDU:
1. Disconnect the data cable from the MCDU;
2. Hold down the OVFY button;
3. Reinsert the data cable into the MCDU while still holding the OVFY button;
4. Release the OVFY button after the data cable has been reconnected;
5. Navigate to the firmware upgrade page in the WingFlex Bridge Software and select the icon of MCDU device;
6. Click the « Start » button to initiate the firmware upgrade process;
7. Once the upgrade is complete, disconnect the data cable from the MCDU and return to the main interface of the Bridge Software, the update progress should only take a few minutes or a few seconds, depends on your network situation;
8. Reconnect your MCDU as normal; you can now enjoy the enhanced experience provided by the latest firmware.
B737 CDU:
1. Disconnect the USB cable.
2. Press and hold the MENU + PREVPAGE buttons.
3. Release the buttons after connecting the USB cable.
4. Go to the FW upgrade page and click « Start ».
B777 CDU:
1. Disconnect the USB cable.
2. Press and hold the FIX + PREVPAGE buttons.
3. Release the buttons after connecting the USB cable.
4. Go to the FW upgrade page and click « Start ».
A320 OVERHEAD PANEL:
1. Connect the power and USB cables, then turn on the power.
2. Press and hold « APU START » and « RAIN RPLNT » for 3 seconds. Release when the backlight starts flashing to enter Upgrade Mode.
3. Launch the bridge software, open the FW Upgrade page, select « Equipment”, and click « Start ». Once the upgrade is complete, the device will automatically restart in NormalMode.
4. To exit Upgrade Mode manually, press and hold « APU START » and « RAIN RPLNT » again for 3 seconds. The backlight will stop flashing and the device will return to Normal Mode.
